banner

Shrink wrapping machine with thermo-retractable film

Shrink wrapping machine with thermo-retractable film

Special version with mixed mode electric and steam.

Production: available in 3 models up to 12, 15 and 22 packs per minute, depending on product size and film thickness Max packet size: depending on film width (item base + height: 900 mm.) 

Film to be used To use with PE shrink lm Weldable lm thickness: 35/120 mM Diam. max usable coil: 300 mm. Max width: 900 mm.

The machine, with steel frame painted, consists of:

– Supply tape mm. 870 x 650 motor with adjustable speed with inverter. Device with pneumatic movement of the tape forward / backward to facilitate the passage of the pack over the sealing bar.

– Photocells for reading product and management of the packaging cycle.

– Upper and lower film feed motor with end film alarm.

– Dragging plastic roll placed on the roller feed conveyor to facilitate the performance of the film and the passage of very light products.

– Pneumatic sealing bar mm. 950 for heating cutting and welding film with Teflon insert with adjustable temperature from the control panel.

– Film usable range: max. mm. 900

– Maximum product height : mm. 380

– Pneumatic sealing product over the bar with pressure regulator and height adjustment.

– Conveyor belt tunnel with Teflon net : W = 830 mm. - with adjustable speed with inverter.

– Shrink tunnel with hood size: L=1200 x W=900 x H=420 mm.

– Tunnel with mixed heating with electrical heaters (12 kW) and heat exchanger steam. Steam connection input 1” and output ¾”.

– Max pressure steam plant 18 bar.

– Temperature inside the tunnel appears and adjustable temperature control place on the electrical panel. Max 200 ° / 220 ° C.

– Paving-side rolls mounted at tunnel exit.

– Control panel with PLC and operator panel that display anomalies.

– Protective equipment as per EC safety rules.

– Machine mounted on feet.

 

Possible user mode

Special machine for the laundry industry, suitable for the packaging of different sizes. The machine is equipped with a heat exchanger that allows the use of steam - connecting the same to the existing production equipment, reducing the consumption of electric energy. 

 

TECHNICAL DATA

Worktop height mm. 850 (+ - 50 mm.)

Colour machine Gray RAL 7035 – blue RAL 5005

Main voltage 400 V AC - 50 Hz. + N 

Auxiliary voltage 24 V. dc

Installed power resistors 12 kW + steam = 15 kW or just electric power= 16,5 kW Total: 19.5 kW

Compressed air supply 6 bar

Compressed air consumption 16 Nl/cycle

Max pressure 18 bar steam plant 

Steam inlet connection 1”

Steam outlet connection ¾”

Documentation Wiring diagram User manual Parts list Print program

Request more information

Reliability, professionalism, maximum competence, customer attention and continuous updating are our main strengths.